Are you thinking of installing a bathroom mirror in your Toronto-area home? It is not only a functional item but improves the look and feel of your space.
Mounting a beautiful mirror can create an illusion of space and add depth and brightness to your bathroom. To that end, it is recommended that you hire a professional glass installation company like Academy Glass.
But, if you are determined to install it yourself, follow the steps.
Transform Your Bathroom with These Pro Tips for Installing a Mirror
Follow these steps to install a bathroom mirror in your Toronto home.
Determine the Right Location
Selecting the right location for your bathroom mirror is the first step. Keep in mind its shape and size. For instance, most standard bathroom mirrors are placed above the sink. But a full-length mirror covers a larger space, so you need a large open wall space to fit the latter.
Consider hanging it on the wall behind the bathroom door. Whichever mirror you choose, ensure that it is mounted at a comfortable height and in a position where it can reflect light.
Take Precise Measurements and Markings
After you have decided on the mirror’s exact location, measure its width and height. Then, mark the wall’s centre point where it will be mounted. By successfully completing this step, you are assured that your mirror is at the right level when it is installed. Use a pencil to do the markings properly.
Identify the Studs
To ensure that the bathroom mirror is attached properly to the wall, identify the studs with a stud finder. Use a pencil to mark their place on the wall. (Studs are upright supports in the wall to which drywall, sheathing, etc., are attached.)
Drill Holes
Use a drill bit smaller than the screws you will be using to drill pilot holes at the location of the stud. This will make it easier for you to insert the screw later. However, you have to be alert not to drill holes very deeply and damage wires or pipes behind the wall.
Set Up Anchors
The next step is to insert wall anchors into the pilot holes. These anchors allow you to secure screws as well as offer extra support for your mirror. There are a variety of wall anchors available such as plastic and metal. Make sure you select one that is suitable for the kind of wall you have. For example, a plaster wall may require a different type of anchor than drywall.
The weight of the mirror will also determine the best anchor to use. Heavier mirrors will require stronger anchors to support their weight.
Attach Brackets Properly
The next step is to attach the brackets to the wall by screwing in the screws with a screwdriver. (A bracket is a kind of fitting used to hold small or large items.) Ensure that the brackets are level and properly aligned with the marks you made. When using two to three brackets, make certain they are all spaced evenly and aligned with one another.
Attach the Mirror Clips
Place the mirror clips onto the brackets. Ensure that the clips are evenly spaced and aligned with the wall’s center point. Use a measuring tape to ensure that the clips are placed at the same height and distance from each other.
Hang the Mirror
Lift the mirror onto the brackets carefully and align the clips using the corresponding clips on the back side of the mirror. Don’t forget to hold the mirror securely in place while attaching it to the brackets.
Secure the Mirror
Use a screwdriver to tighten the screws on the mirror clips. This ensures that the mirror is attached to the wall properly. If you are using more than one clip, then tighten them in a specific cross pattern and make sure the mirror is effectively secured.
Clean the Mirror
Once the mirror is installed, clean the surface using a soft cloth and glass cleaner. This helps to remove smudges or fingerprints and ensures that the mirror looks clean and bright.
By following this guide, you are assured that your bathroom mirror is installed successfully in your Toronto home. However, if you don’t have the time and knowledge to do it, hire our installers for a professional and efficient bathroom mirror installation.